Showing posts with label optical fiber. Show all posts
Showing posts with label optical fiber. Show all posts

Saturday, December 20, 2008

Light Bends Glass

Light gives a push rather than a pull when it exits an optical fiber, according to experiments reported in the 12 December Physical Review Letters. The observations address a 100-year-old controversy over the momentum of light in a transparent material: Is it greater or smaller than in air? In the experiments, a thin glass fiber bends as light shines out the end, apparently a recoil in response to the light gaining momentum as it passes from glass to air. But the many experimental subtleties mean that the issue is unlikely to be settled soon.

Light moves slower inside a material than it does in air or vacuum. In 1908 German mathematician Hermann Minkowski suggested that the momentum of light goes up as its speed goes down. A year later, German physicist Max Abraham claimed the exact opposite, that the momentum goes down with decreasing speed.

Abraham might appear to be correct, since the momentum of ordinary objects always goes down with decreasing speed. But Minkowski seems to be favored by quantum mechanics, which says that a photon's momentum goes up as the light's wavelength decreases--and the wavelength always shortens as light enters a material from air. Many theoretical arguments appear to point to an Abraham momentum, but most of the experimental evidence to date argues for Minkowski. The experimental difficulty is that in most cases, both formulations lead to the same predicted forces, after one accounts for the momenta of both the light and the medium. So experiments must be carefully designed to isolate the effect of the light's momentum and avoid other phenomena, such as thermal effects, that can mask the light-induced force.

In their experiment, Weilong She of Zhongshan University in Guangzhou, China, and his colleagues used a filament of silica half a micron wide and 1.5 millimeters long. As the fiber dangled vertically, the researchers shined 270-millisecond laser pulses at a wavelength of 650 nanometers down the fiber. As the light pulses exited out the bottom, a gain in momentum (à la Abraham) would cause the fiber to recoil back like a gun, whereas a loss (à la Minkowski) would pull the fiber straight down. "When I began this experiment, I was really unsure which one is correct," She recalls. The fiber bowed outward with each pulse, which the researchers say is a sign that it's recoiling as Abraham would predict.

The researchers performed a second experiment with a longer fiber and continuous--rather than pulsed--laser light and found similar results. The tip of the hanging fiber moved sideways like a pendulum by about 30 microns, which agreed with the tiny force (less than a billionth of a Newton) that they predicted. The team also verified that thermal effects, such as heat expansion, would be too small to influence the fiber's movement.

The researchers performed a second experiment with a longer fiber and continuous--rather than pulsed--laser light and found similar results. The tip of the hanging fiber moved sideways like a pendulum by about 30 microns, which agreed with the tiny force (less than a billionth of a Newton) that they predicted. The team also verified that thermal effects, such as heat expansion, would be too small to influence the fiber's movement.

Saturday, November 15, 2008

Short fibre creates ultrafast OPO

A fibre optical parametric oscillator (FOPO) based on a 4.2 cm length of microstructured fibre that emits 70 fs pulses has been unveiled by researchers at the US universities of Cornell and California Merced. The system is said to deliver the shortest optical pulses reported for any FOPO and is a significant step towards making the technology commercially viable. (Optics Express 16 18050)

"The majority of OPOs are not portable and occupy a large footprint on an optical table," Jay Sharping of Merced's School of Natural Sciences told optics.org. "My motivation is to generate tunable pulsed light of sufficient output power in a portable fibre platform. This result is a step in that direction as it explores the generation of ultrafast laser light with tens of mW of average power."

Sharping and colleagues start with a commercially available microstructured fibre that has been drawn down to a reduced core size in order to modify the fibre's dispersion profile. They place the 4.2 cm length of fibre in a Fabry-Perot cavity and pump it using a ytterbium-doped fibre laser emitting at 1032 nm. The end result is 70 fs, 0.4 nJ pulses at 880 nm with an output peak power for 5kW for a pump peak power of 22 kW.