New study will contribute to better understanding of nuclear ignition

UCSD scientists create computer simulations like the ones above to determine how to successfully achieve controlled, miniaturized nuclear ignition of spherical fuel pellets in laboratory environments using lasers as energy drivers.

Under a recent three-year, $510,000 grant from the National Nuclear Security Administration (NNSA), Vu and his colleagues at Los Alamos National Laboratory (NM), Lodestar Research Corporation and the Laboratory for Laser Energetics at the University of Rochester in New York, are using computer simulation tools to figure out how to successfully achieve controlled, miniaturized nuclear ignition of spherical fuel pellets in laboratory environments using lasers as energy drivers.

Vu said the primary lasers for these studies are the Omega laser at the University of Rochester (NY) and the newly built National Ignition Facility at Lawrence Livermore National Laboratory (CA).

"What we would like to do is take the laser and shine the laser onto what we call a hohlraum, a cylindrically shaped black-body radiator made of high-Z materials (typically gold), in the middle of which the miniaturized fuel pellet is placed," he explained. "The material on the wall of the hohlraum absorbs the laser energy, heats up, and becomes a plasma. The plasma in turn irradiates off its newly acquired energy, and the resulting black-body radiation is what drives the miniaturized fuel pellets to nuclear ignition. It's like sunlight hitting the dashboard of a car - the energy of the sunlight is absorbed by the dashboard and is irradiated as heat, essentially electromagnetic radiation on a different wavelength spectrum from the original sunlight. It's a lot of fancy physics. But if you think about in on a fundamental level, it's pretty simple.

Source: University of California - San Diego

World's highest-energy laser to create mini-stars

To produce the temperatures and pressures needed for fusion, the facility will aim all of its 192 laser beams simultaneously on a hydrogen target. This all happens inside this 10-metre-diameter chamber, which weighs 130 tonnes. The sphere is made up of 18 aluminium sections that are each 10 centimetres thick.

The square openings are for the lasers, and the round openings are used to accommodate nearly 100 pieces of diagnostic equipment.

This is a view of the target chamber from the inside. The laser beams enter through ports in the chamber to deliver almost 500 trillion watts of power to the tip of the positioner (right), which will hold the target for each experiment. When all of its beams are fully operational, NIF will focus nearly 2 million joules of ultraviolet laser energy at that tiny target, delivering 60 times more energy than any previous laser system.


All 192 lasers that enter the National Ignition Facility chamber will be trained on this pencil-eraser-sized cylinder. This capsule will hold the pea-sized target, which for fusion experiments will be a pellet of frozen hydrogen. Laser beams will enter through openings at each end to compress and heat the hydrogen in the hopes of creating a self-sustaining fusion reaction.



As laser beams hit the interior of the gold-plated capsule, they will create intense X-rays that can squeeze the pea-sized pellet of hydrogen down to a speck about the width of a human hair and heat it to some 3 million °C. The burst of laser light will last just billions of a second, but physicists hope the intense pulse will force hydrogen atoms to combine to form helium, releasing enough energy to fuse all other neighbouring hydrogen atoms until the fuel is spent.

Before reaching the chamber, laser light must be converted from infrared light to ultraviolet light, which is more effective at heating the target.

This conversion is accomplished with plates sliced from large potassium dihydrogen phosphate (KDP) crystals.

This crystal, which weighed about 360 kilograms, started out from a seed crystal and grew to its pictured size inside a 2-metre-tall vat of solution over a period of two months. Each crystal is sliced into plates measuring 40 cm². More than 600 of these plates are needed for the National Ignition Facility. (Image: Lawrence Livermore National Security, LLC/Lawrence Livermore National Laboratory/Department of Energy)

Europe moves forward with laser-fusion plans

I have blogged a report about this HiPER project last year, here I cited a report from physics world website.

Physicists and politicians from across Europe and beyond gathered at London's Science Museum on Monday to mark the beginning of a three-year "preparatory phase" of a new €1bn project known as the European High Power Laser Energy Research Facility (HiPER). So why do we need another fusion energy project? physicsworld.com looks for the answers.

What is HiPER?

HiPER is designed to show that laser-driven fusion can provide the world with energy in the future. The idea is to direct a series of extremely powerful laser beams onto a small capsule of deuterium-tritium fuel, heating up the outer surface of the capsule and forcing it to expand outwards, which, by Newton's third law, causes the centre of the capsule to implode.

Another ultra high-power laser heats this high-density core to around one hundred million degrees Kelvin. This energizes the deuterium and tritium nuclei sufficiently so that they overcome their mutual repulsion and fuse, releasing excess energy in the form of neutrons, which can be used to produce electricity.

Aren't physicists already studying inertial confinement?

They are, but of a different sort. Scientists know that inertial-confinement works, since it is this that generates the fusion reactions inside hydrogen bombs. These bombs use an initial fission explosion to rapidly compress a deuterium-tritium mixture, with shock waves created inside the mixture heating it to the point of ignition. This "central ignition" process is being reproduced in a controlled way at billion-dollar military facilities — the National Ignition Facility (NIF) at the Lawrence Livermore Laboratory in the US and the Mégajoule laboratory in France — where a single set of lasers both compresses and heats the fuel. HiPER, on the other hand, will use a separate laser pulse to do the heating, a process known as "fast ignition" because the second laser must heat the fuel within 10-11s of the implosion.

What are the advantages of fast ignition?

It is more efficient than central ignition. Setting up shock waves requires the fuel to be compressed to enormous densities, which needs very high laser energy per unit mass of fuel. Since fast ignition requires only intermediate densities, it can in principle be used to ignite a larger mass of fuel for a given input energy. And more mass equals more output energy, which means higher efficiencies. In fact, proponents of fast ignition reckon that it is some two to three times more efficient than central ignition. In addition, fast ignition does not require the same degree of precision in the uniformity of the compressing laser pulses and the shape of the fuel pellet.

So where does HiPER fit in?

HiPER is being designed to show that fast ignition, once proven in principle, can then be used as an energy source. This means demonstrating that the fusion process can be repeated at high frequencies. Inertial confinement is a pulsed technique — similar in principle to the repeated cycles of chemical combustion in the engine of a car — and at NIF the laser system fires perhaps once a month, whereas a commercial power plant would need to fire about five times a second to provide the 2 gigawatts typical of a large power station. HiPER will trial the fully-robotic process needed to achieve such a frequency.

What happens next?

The six countries that have officially backed HiPER - the UK, France, Spain, the Czech Republic, Italy and Greece - marked the formal start of a three-year "preparatory phase" for the project on Monday. This phase, which will involve detailed studies of short-pulsed lasers and fuel pellets, as well as decisions on costs, location etc., is being funded with €13m of cash and €50m of work in kind.

Some two to three years down the line another €100m will be needed to develop prototypes, and a few years after that the remainder of the roughly ?1bn construction costs will be needed to actually build the thing. Operating costs over the facility's roughly 20-year life time will also be about €1bn. If all goes well, the facility should start up by around the end of the next decade. As to where it will be built, this depends ultimately on who is prepared to commit the cash, but the UK, which is coordinating the project, is certainly in the running.

When might a commercial fusion plant start operating?

The billion-dollar question. The quest to derive energy from nuclear fusion has been plagued by wildly optimistic expectations in the past, and critics have quipped that fusion is always 40 years from commercialization. Fusion advocates, however, are confident that it could happen by about 2050. Indeed, Dunne thinks this estimates holds good for both magnetic and inertial confinement. He concedes that magnetic fusion is "a generation ahead" of its laser equivalent, but believes that fast ignition could potentially close the gap quickly.

David Meyerhofer of Rochester University believes that fusion reactors could ultimately replace all large power plants and be used to extract hydrogen from water for transport. "Thus," he says "it is possible that fusion could eventually produce more than 50% of the world's energy needs." However, he adds that this estimate is "very speculative".

Rochester's Omega Laser Receives 50-Fold Power Increase to Become 'Petawatt' Laser

The University of Rochester will mark another important step in the effort toward attaining sustainable fusion, the ultimate source of clean energy, Friday, May 16.

University President Joel Seligman, along with special guests, who include U.S. Senator Charles Schumer, U.S. Representative Thomas Reynolds, and Undersecretary and National Nuclear Security Administration Administrator Thomas D'Agostino, will dedicate the new Omega EP (Extended Performance) laser facility at the Robert L. Sproull Center for Ultra High Intensity Laser Research at the Laboratory for Laser Energetics (LLE).

The Omega EP comprises a new set of four ultra-high-intensity laser beams that will unleash more than a petawatt—a million billion watts—of power onto a target just a millimeter across. Working in conjunction with LLE's original 60-beam Omega laser, the Omega EP will open the door to a new concept called "fast ignition," which may be able to dramatically increase the energy derived from fusion experiments and provide a possible new avenue toward clean fusion power. If successful, fast ignition could lead to the highest energy densities ever achieved in a laboratory.

"I look forward to the profound scientific contributions the Omega EP extension will bring to the University and to the world," says Seligman. "It is a vital component of our nation's scientific capital and leadership, a key to strategic work on an independent energy future, and a vital part of the local economy, including $44 million in local expenditures just last year."

"Over the years, the University of Rochester's Laboratory for Laser Energetics has consistently brought Upstate New York's high-tech sector to the forefront of energy innovation," says Schumer. "It is a vital national resource as well as an economic boon to Rochester and to the entire Finger Lakes region. I was proud to secure over $61 million to support their efforts last year and will continue to look for ways in which the federal government can further collaborate with this dynamic laboratory in the future."

"Employing more than 500 Western New Yorkers, the Laboratory for Laser Energetics of the University of Rochester is essential to the growth of our community and ensures Rochester is on the cutting edge of technology," says Reynolds. "The new Omega EP laser is truly remarkable and serves as a clear demonstration of how our region remains a leader in world-class innovation. The Omega EP's success is a testament to the scientists, engineers, technicians, and students who made the project possible."

The original Omega laser fires multi-trillion watt bursts of energy—more powerful than the entire electrical generating capacity of the United States—making it among the three most powerful lasers in the world. Yet Omega will become approximately 50 times more powerful still with the inclusion of Omega EP. Such incredible intensities are necessary because creating electricity from fusion means heating the target fuel to a high temperature and confining it long enough so that more energy is released than is supplied to sustain the reaction. To release energy at a level required for electricity production, the fusion fuel must be heated to about 100 million degrees, more than six times hotter than the interior of the Sun.

Fusion, nuclear fission and solar energy, which includes biofuels, are widely seen as the only energy sources capable of satisfying the growing need for power for the next century without the harmful environmental impacts of fossil fuels. In a fusion power plant, one gallon of seawater would provide the equivalent energy of 300 gallons of gasoline; fuel from 50 cups of water contains the energy equivalent of two tons of coal. A fusion power plant would produce no climate-changing gases, as well as considerably less environmentally harmful radioactive byproducts than nuclear power plants currently do. And there would be no danger of a runaway reaction or core meltdown in a fusion power plant.

Beyond clean energy production, Omega and Omega EP will facilitate research impossible to attempt almost anywhere else on Earth. The way matter behaves in stars can be replicated on a small scale inside Omega's target chamber. Laser and materials technologies, electro-optics, and plasma physics will also be able to be studied under conditions never before possible.

Source: University of Rochester

Protons bring fusion into view

Researchers in the US have now developed an imaging technique that could help bring fusion power to fruition. Richard Petrasso and colleagues at the Massachusettes Institute of Technology and Wolfgang Theobold and colleagues at the University of Rochester have used "proton radiography" to map the electromagnetic structure of the extremely hot, dense plasmas in which fusion reactions take place. The technique has revealed hitherto unseen magnetic and electric fields, and could help researchers to get fusion plasmas to ignite—the key to electricity generation.

The MIT-Rochester technique applies to inertial-confinement fusion (ICF), which is one of two possible routes to a fusion reactor. The idea behind ICF is to bombard fuel capsules (typically containing deutrium and tritium) with high-powered laser pulses so that they implode, generating a small volume of hot, dense plasma in which the deutrium and tritium nuclei can overcome their electrical replusion and produce a helium nucleus plus a free neutron. Since these reaction products are lighter than the original nuclei, copious energy is released via Einstein's mass-energy equivalence.

In the new work, the MIT and Rochester researchers used 36 beams at the high-powered OMEGA laser facility at Rochester to symmetrically implode ICF fuel capsules (Science 319 1223). The same beams also struck a different capsule 1 cm away which was filled with deuterium and helium-3 gas. Protons released from this "backlighter" capsule all have the same (known) energy, so by measuring the deflection of the positively charged protons that had transited some plasma the team was able to map the electromagentic fields present in ICF implosions for the first time.

Diagram of the experiment used to image the plasma. Protons from the backlighter capsule (left) travel through the target capsule before their position and energy is determined by a detector. (Courtesy: Science)